5052 aluminum coil

5052 Aluminum Coil Introduction:

5052 alloy metal aluminum coil belongs to the 5000 series metal aluminum alloy, which is an alloy composed of 2.5% magnesium and 0.25% chromium. It is considered to have good machinability and solderability. It has moderate static strength and high fatigue strength. The corrosion resistance of this aluminum is very good, especially in marine environments. Like other aluminum alloys, this metal has good thermal conductivity and low density. To harden aluminum 5052, cold working can be used. Heat treatment cannot be used to obtain higher alloy strengths.

5052 Aluminum Coil Introduction.

Application Of 5052 Aluminum Coil

  • Refrigerator liners
  • Fuel tanks
  • Storm shutters
  • Panels
  • Bottom plate
  • And more

5052 aluminum coils are widely used in automobiles. It is commonly used in covers and parts, truck shock absorbers, etc. For example, semitrailers produced in the United States have 5052 aluminum alloy side panels and an internal thickness of 4-5 mm

5052 aluminum coil is also widely used in ships. The construction and working environment of ships require that materials should have good corrosion resistance, weldability, plasticity, and certain tensile strength, yield strength, elongation, impact resistance and other properties. 5052 aluminum alloy can meet these properties, it can be used in ship construction, such as deck, ship side, bottom plate, wheelhouse, porthole, mast and so on.

5052 is also an aluminum alloy, which is used for can lids, beer with internal pressure, carbonated beverage cans, and juice cans without internal pressure. 5082 aluminum alloy and 5052 aluminum plate are respectively used, and the material is first oxidized to improve the adhesion of the coating. Stress and corrosion resistance. After the paint on both sides has dried, the can lids are processed.

Application Of 5052 Aluminum Coil

5052 aluminum sheet thickness

( thin ) 0.5mm, 0.7mm, 0.8mm, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm ( thick ) etc

0.8 x 322 x 322 mm, 1000mm x 2000mm ( 1000x2000mm ) , 1.22 x 2.44 ( 4x8 , 4 by 8, 48 x 96, 8x4 ), 1500x3000, 4x10, 4x4 etc

Performance Advantages

  • 1. The surface is smooth, without cracks, corrosion spots and nitrate traces;
  • 2. High fatigue resistance, good plasticity and corrosion resistance;
  • 3. Good weldability, poor machinability and polishing;
  • 4. The elongation of 5052 aluminum coil can reach 12-20%, and the elongation of 1060 aluminum plate is increased by 200%.

Properties Of 5052 Alloy Aluminum Coil

Elements Si Fe Cu Mn Mg Cr Zn Ti Others Al
Content0.250.40.10.12.2-2.80.15-0.350.1-0.15Remain
Alloy
Temper
Specified thickness Tensile
strength
Yield
strength
Elongation
(MPa)(MPa)(%)
5052 HO/H1110.3~0.63mm173-213min66min 15
0.63~1.2mmmin 17
1.2~6.3mmmin 19
6.3~50mmmin 18
5052/H32 or 5052 H220.4~0.63mm214-262min159min 4
0.63~1.2mmmin 5
1.2~6.3mmmin 7
6.3~50mmmin 11
5052/H34 or 5052 H240.4~0.63mm235-282min180min 3
0.63~1.2mmmin 4
1.2~6.3mmmin 6
6.3~50mmmin 10
5052/H36 or 5052 H260.1~0.32mm256-303min200min 2
0.32~0.63mmmin 3
0.63~4mmmin 4
5052/H38 or 5052 H280.15~0.32mmmin269min221min 2
0.32~0.63mmmin 3
0.63~3.2mmmin 4