Что 3003 алюминиевый сплав

3003 aluminum alloy is a kind of wrought AL-MN alloy, and it is also a representative product of 3000 серия из алюминиевого сплава;

3003 aluminum alloy is a non-heat-treatable aluminum alloy and it can be cold-worked to obtain a tempered state with higher strength but lower ductility;

3003 Алюминиевый сплав

Алюминиевый сплав 3003 is usually obtained by rolling. As a wrought alloy, it cannot be cast and is often used in sheet metal applications such as gutters, downspouts, roofing, and siding.

Alternate of aluminum alloy 3003

3.0517	A93003	ISO standard 6361	ASTM B209
ASTM B210	ASTM B211	ASTM B221	ASTM B483
ASTM B491	ASTM B547

aluminium 3003 composition

алюминиевый сплав 3003 химический состав

Chemical Element	% Present
Другие (Total)	0.0 – 0.15
Cobalt (Co)	0.05 – 0.20
Hydrogen (H)	0.0 – 0.70
Magnesium (мг)	1.00 – 1.50
Silicon + Iron (Si+Fe)	0.0 – 0.60
Zirconium (Zr)	0.0 – 0.10
Other (Each)	0.0 – 0.05
Aluminium (Аль)	Balance

3003 aluminium alloy properties

3003 aluminium alloy physical propertys

Physical Property	Value
Плотность	2.73 г/см³
Melting Point	655 °C
Thermal Expansion	23.1 x10^-6 /K
Modulus of Elasticity	69.5 ГПа
Thermal Conductivity	190 W/m.K
Electrical Resistivity	0.034 x10^-6 Ω .m

3003 aluminum density

The density of aluminium is about 2,710kg/m3. The density of the alloys of aluminium does not vary widely from this figure ranging between 2,640kg/m3 and 2,810kg/m3.
3003 aluminum alloy is an al-mn alloy, и 3003 aluminum density is slightly higher than that of pure aluminum, который 2.71 г/см³.
Source：Wiki of 3003 алюминиевый сплав

3003 aluminium alloy Mechanical Properties

Although 3003 aluminum alloy has strong strength and machinability, it still exhibits different mechanical properties in different temper. The following are the machinability tables of several typical tempering states:

aluminium 3003-O data sheet

Толщина (дюйм)	Предел текучести Min. (тысяч фунтов на квадратный дюйм)	Предел прочности (тысяч фунтов на квадратный дюйм)		Удлинение (%) Min.	Bend Diameter Factor,N
		Min.	Max.
0.006 – 0.019	5.0	14.0	19.0	14	0
0.008 – 0.012	5.0	14.0	19.0	18	0
0.013 – 0.031	5.0	14.0	19.0	20	0
0.032 – 0.050	5.0	14.0	19.0	23	0
0.051 – 0.249	5.0	14.0	19.0	25	0
0.250 – 3.00	5.0	14.0	19.0	23	–

aluminium 3003-H12 data sheet

Толщина (дюйм)	Предел текучести Min. (тысяч фунтов на квадратный дюйм)	Предел прочности (тысяч фунтов на квадратный дюйм)		Удлинение (%) Min.	Bend Diameter Factor,N
		Min.	Max.
0.017 – 0.019	12.0	17.0	23.0	3	0
0.020 – 0.031	12.0	17.0	23.0	4	0
0.032 – 0.050	12.0	17.0	23.0	5	0
0.051 – 0.113	12.0	17.0	23.0	6	0
0.114 – 0.161	12.0	17.0	23.0	7	0
0.162 – 0.249	12.0	17.0	23.0	8	0
0.250 – 0.499	12.0	17.0	23.0	9	–
0.500 – 2.000	12.0	17.0	23.0	10	–

aluminium 3003-h14 data sheet

Толщина (дюйм)	Предел текучести Min. (тысяч фунтов на квадратный дюйм)	Предел прочности (тысяч фунтов на квадратный дюйм)		Удлинение (%) Min.	Bend Diameter Factor,N
		Min.	Max.
0.009 – 0.012	17.0	20.0	26.0	1	0
0.013 – 0.019	17.0	20.0	26.0	2	0
0.020 – 0.031	17.0	20.0	26.0	3	0
0.032 – 0.050	17.0	20.0	26.0	4	0
0.051 – 0.113	17.0	20.0	26.0	5	0
0.114 – 0.161	17.0	20.0	26.0	6	2
0.162 – 0.249	17.0	20.0	26.0	7	2
0.250 – 0.499	17.0	20.0	26.0	8	–
0.500 – 1.000	17.0	20.0	26.0	10	–

aluminium 3003-h18 data sheet

Mechanical Properties	Metric	English
Ultimate Tensile Strength	200 МПа	29000 пси
Tensile Yield Strength	186 МПа	27000 пси
Shear Strength	110 МПа	16000 пси
Modulus of Elasticity	68.9ГПа	10000 тысяч фунтов на квадратный дюйм
Shear Modulus	25 ГПа	3630 тысяч фунтов на квадратный дюйм

What is the features of 3003 алюминиевый сплав

• Light weight: 3003 aluminum alloy is significantly lighter than other metal alloys, making it a popular choice for applications where weight reduction is important.
• Высокая прочность: Despite its light weight, 3003 aluminum alloy has a high strength-to-weight ratio, making it a durable and reliable material for a variety of applications.The hardness of 3003 aluminum is higher than that of 1000 series aluminum (1050 алюминий, 1060 алюминий,1100 алюминий )
• Good formability: 3003 aluminum alloy has good formability, making it easy to fabricate into complex shapes and designs.
• Устойчивость к коррозии: 3003 aluminum alloy has excellent corrosion resistance, making it a popular choice for outdoor and marine applications.
• Good weldability: 3003 aluminum alloy has good weldability, making it easy to join and fabricate into complex structures.
• Good thermal conductivity: 3003 aluminum alloy has good thermal conductivity, making it a popular choice for heat exchangers, cookware, and other heat-sensitive applications.
• Good electrical conductivity: 3003 aluminum alloy has good electrical conductivity, making it a popular choice for electrical applications.

Что 3003 aluminum used for

3003 aluminum alloy is widely used, and different 3003 aluminum alloy products have different applications;
Typical applications of 3003 aluminum alloy sheets are:

• Automotive Interiors
• Fuel Tanks
• Water Tanks
• Automotive Heat Shields
• Decorative Parts
• Pressure Vessels
• Heat exchangers
• Corrugated roofing
• Cooking utensils & kitchen equipment
• Garage Doors
• Refrigerator Panels

3003 Aluminum For Cans

The applications of 3003 aluminum Tread Plate are:

• car skid plate
• Trim
• Ornamental
• Steps
• Upstairs
• Floating Docks
• Walkways
• Truck Tool Boxes

3003 aluminum coil application：

3003 Aluminum For Cans	3003 Aluminum For Lampshade

3003 aluminum strip application:

• Armored cable
• Transformer

3003 aluminum price

3003 aluminum is a perfect combination of weight and hardness in terms of performance. In fact, there is another reason why 3003 aluminum can be used in many industries;

The perfect combination of performance and price can also be used to describe 3003 алюминий;

The price of 3003 aluminum is slightly higher than that of 1000 series aluminum alloys (150/1060/1100) but much lower than that of 5000 series aluminum alloys. Поэтому, 3003 aluminum has a high cost performance and is widely used in the market;

Factors affecting the price of 3003 алюминий:

• Aluminum ingot price (raw material)
• Processing cost
• Exchange rate
• Packing and Shipping Fees

3003 aluminum vs 6061

The biggest difference between 3003 aluminum and 6061 aluminum is that 3003 aluminum cannot be heat treated, while 6061 can be strengthened by heat treatment;
There is also a big difference between the two in terms of performance. We take 6061-T6 and 3003-H18 as examples for comparison;

3003 vs 6061 алюминиевый сплав

Comparison of material properties between 6061 & 3003 алюминиевые сплавы

Material properties	Type 6061 Алюминиевый сплав		Type 3003 Алюминиевый сплав
Units	Metric	English	Metric	English
Предел текучести	276 МПа	40000 пси	185 МПа	26800 пси
Bearing Yield Strength	386 МПа	56000 пси	262 МПа	38000 пси
Shear Strength	207 МПа	30000 пси	110 МПа	16000 пси
твердость (Бринелл)	95		55
Machinability	Good		Fair

Price comparison 3003 aluminum vs 6061

3003 aluminum alloy yield strength, shear strength, hardness, machinability, и т. д.. are not as convenient as 6061 алюминий, но 3003 aluminum alloy has its own advantages, that is the price. The price of 3003 aluminum is much lower than that of 6061, so the application of 3003 aluminum is more for extensive.