Standart: GB/T3190-1996

●1070 aluminum chemical composition:

Silikon Evet: 0.20
Demir Fe: 0.25
Bakır Cu: 0.04
Manganez Mn: 0.03
magnezyum mg: 0.03
çinko çinko: 0.04
titanyum ti: 0.03
Vanadyum V: 0.05
Alüminyum Al: 99.7

●Mechanical properties of 1070 alüminyum:

çekme mukavemeti σb (MPa) )≥75
Koşullu akma dayanımı σ0.2 (MPa) )≥35
numune boyutu: Tüm Et Kalınlıkları
Not: Oda sıcaklığında borunun boyuna mekanik özellikleri

●Main features and application range of 1070 alüminyum:

1070 industrial pure aluminum has the characteristics of high plasticity, korozyon direnci, iyi elektriksel iletkenlik ve termal iletkenlik, ama düşük güç,
Without strengthening by heat treatment, the machinability is not good, and contact welding and gas welding are acceptable. Make more use of its advantages to create a
Some structural parts with specific properties, alüminyum folyodan yapılmış contalar ve kapasitörler gibi, elektronik tüp izolasyon ağları, teller,
Koruyucu kılıflar, ağlar, wire cores for cables, parts and decorations for aircraft ventilation systems.

●1070 aluminum heat treatment process:

Carry out oil quenching and tempering. The strength of this type of steel wire is not as good as that of lead-bath treated steel wire, but its performance is uniform,
The cost is lower. After cold roll forming, stress relief treatment is carried out. Pulled to the specified size, and then annealed.
After the softened cold roll is formed, it needs to be quenched and tempered at medium temperature to obtain the required mechanical properties.